Appliances

Appliances

Cookware

Cookware

Bed & Bath

Bed & Bath

Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
  • Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
  • Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
  • Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
  • Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
  • Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
  • Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
  • Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
  • Load image into Gallery viewer, Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter
Vendor
Hole Pro

Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter

4.5
Regular price
CA$ 325.00
Sale price
CA$ 325.00
Regular price
CA$ 536.00
Sold out
Unit price
per 
Save 39% (CA$ 211.00)
Error You can't add more than 500 quantity.

  • Tracked Shipping on All Orders
  • 14 Days Returns

Description

  • Hole Pro XL Shield & XL Arbor for hole saws up to 2-1/2" deep & 6" dia
  • Arbor adjusts for cutting depth control & insures perfect straight cuts
  • ABS Shield (8" OD) captures 100% of dust. Adjustable cutting depth control
  • Work with all 1/2"-20 & 5/8"-18 thread mount holes saws ** Hole Saw NOT INCLUDED
  • ** SKU HP1156 Large 9" shield Model available ASIN B07K6VV8V4 ***

Shipping and Returns

  • We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
  • Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
  • Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
  • All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
  • Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
  • In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.

Customer Reviews

Master Electrician Great product. Have used various Hole Saws but this one was the best ever. Highly recommend to any otherr professional.Cut in 72 celing light in sheet rock in no time. Really controls dust and was amazed how well it performed. 5GreAt product Dust shield worked as advertised. The shaft does not move freely once you get some dust in there but that frustration is much less then cleaning up if you do not use this tool. 4OMG, how did I live without this? I ... OMG, how did I live without this? I only gave it 4 stars because the drill bit shaft doesn't always travel smoothly in the up/down direction through the installed bearing. 4EXCELLENT tool! Wanted it for years. So glad I have it. Worth every nickel. 5Five Stars There great I m going to put them on all of my trucks 5Great product. Delivered to my door in 23 hours!! Great product. 5Almost the Perfect Tool. This is a great tool, and I recommend it even with its only shortcoming, which is the fact that there are no pins on the arbor.A hole saw has small holes in the bottom which are used to set the position of the saw on a mandril which usually has two drive pins that mate with the holes. This keeps the hole saw from free-spinning which can lead to either a) the hole saw spinning off of the arbor, or b) the hole saw spinning so tightly onto the arbor that you have to use a vise to get it off. Sadly, both happened to me regularly when using this tool. The saw spinning off can be dangerous, and the saw being too tight is frustrating, especially if you need to change saws frequently.That is, however, my only gripe with the tool, and even with that bit of irritation, I STILL give this a high rating (I'd give it 4.5 if I could). Why? Because it freaking works.If you've ever had a face full of drywall dust from drilling holes for recessed lights, then just buy this tool. Forget all the other ones - this is the one to buy. Yes, it's pricey, but It's well made, has metal parts where they matter, and does what it's advertised to do. And It works with a 6 1/4" hole saw. I know because I just drilled six 6 1/4" holes with it. The pics are of a Klein 6 1/4" hole saw in the shield. The one I received is also better than the one pictured in that it's already drilled and plugged for the vacuum attachment. Honestly, though, I didn't feel the need for the vacuum even after drilling 20+ holes. Drill the hole, dump the dust, pull the plug, and move on to the next one. Fantastic!Unfortunately if you need to pull the hole saw out to get the plug out, you might have to put it on a vise. Grr..The instructions were a bit vague. It comes with "spacers". I have no idea what these are for. I installed them according to the picture on the box, then promptly lost one as the hole saw spun off the arbor. Grr... It comes with a cool little pouch for all the parts, which is nice.It does get dirty, so you'll need to clean it every now and then or it becomes hard to see through the side.Could it be better? Yes - put pins on the arbor and this is becomes a slam-dunk five-star item. 4... wanted to order one at this price but I liked it so much after I tried the first one ... Tried a few other products and was not sure I wanted to order one at this price but I liked it so much after I tried the first one I ordered more. 5Worth the price, You will never need another dust ... Worth the price , You will never need another dust cover!! 5super value for the quality I have one of the Starrett cowl kits that cost me over $170 but worked to control dust when using a carbide hole saw to cut in for recessed ceiling lights or cutting in wall tile in a kitchen or bathroom. After the Starrett cowl kit went missing I looked for another one but found this setup instead. The shield is big enough for a hole saw and yet fits in places where the Starrett was too big to fit. The shield has slots which catch the dust so I can see better and the orange knob on the Hole Pro shield (not the Starrett cowl kit) lets me control how deep the hole cutter cuts. This is useful when cutting out holes in walls for pancake boxes so I don't cut more than I need to cut for the box. The arbor has both 1/2" and 5/8" threads and nothing to change or lose like the Starrett kit. 5
Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2

Hole Pro Hole Saw Dust Shield & XL Arbor kit with Cut Depth Control -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6" diameter

4.5
Error You can't add more than 500 quantity.
Regular price
CA$ 325.00
Sale price
CA$ 325.00
Regular price
CA$ 536.00
Sold out
Unit price
per 
Save 39% (CA$ 211.00)